What services do you offer?

AeroDynamic Drone Services provides professional aerial photography, videography, 2D orthomosaic mapping, thermal inspections, and 3D photogrammetry modeling throughout New England. Using a DJI Mavic 3 Pro for cinematic visuals, a DJI Matrice 4E with RTK for mapping, and a DJI Matrice 4T for thermal work, we deliver accurate, high-resolution imagery, models, and thermal data ready for analysis or marketing.

Where do you work?

We’re based in Southeastern Massachusetts and serve Massachusetts, Rhode Island, Connecticut, New Hampshire, and Maine.

Are you licensed and insured?

Yes - we’re FAA Part 107 certified and carry a $2M commercial drone insurance coverage policy for all operations. Your project is protected from take-off to delivery, whether we’re capturing standard imagery or advanced thermal data.

What accuracy and deliverables can I expect?

Our Matrice 4E and Matrice 4T fly with RTK corrections for precise photogrammetry and repeatable thermal capture. You can expect centimeter-level consistency for most planning, inspection, and construction needs. Deliverables include orthomosaics (GeoTIFF), point clouds (LAS or PLY), and 3D models (OBJ or PLY). For thermal projects, we can provide radiometric thermal stills, thermal video, and annotated reports highlighting hotspots or areas of concern. Turnaround times: 1–3 days for photo/video, 3–5 days for mapping/thermal, and 5–10 days for 3D modeling.

What types of thermal inspections do you provide?

Our DJI Matrice 4T is used for roof and building-envelope thermal scans, solar panel hotspot detection, equipment and utility inspections, and limited search support for missing pets or livestock. Thermal imagery helps reveal heat loss, potential moisture issues, and abnormal hotspots that may not be visible in standard RGB photos or video.

What thermal deliverables will I receive?

Thermal inspection clients typically receive a package that may include radiometric thermal images (R-JPEG), exported thermal stills, short thermal video clips, and annotated screenshots or a brief summary report showing key hotspots or areas that may need further investigation. When appropriate, thermal results can be aligned with standard RGB imagery or mapping outputs for easier interpretation.

How large an area can you map in one full-day session?

Under good conditions with multiple batteries and minimal downtime, our Matrice 4E can realistically map hundreds of acres in a 6–8 hour day. Typical coverage falls between 200–700 acres depending on overlap, altitude, and terrain. We’ll give you a clear estimate based on your site.

Why choose drone mapping instead of traditional surveying?

Drone mapping is faster, safer, and more cost-effective. It provides rich, measurable visuals without the need for scaffolding, heavy equipment, or road closures. It’s ideal for construction progress tracking, planning, marketing, and inspections. For legal survey accuracy, we can integrate data with licensed surveyors.

How far in advance should I book?

We recommend booking 2–3 weeks in advance for planning and airspace approvals. Larger projects may require 4–6 weeks’ notice. Need it sooner? We’ll do our best to accommodate.

Can you fly in restricted airspace or over people/vehicles?

Yes - when legally approved. We handle FAA LAANC authorizations and waivers as needed. Flights over people or vehicles are planned according to FAA safety standards.

What if the weather doesn’t cooperate?

High winds, rain/snow, extreme temperatures or poor visibility may delay flights. We’ll reschedule at the first safe window at no extra cost. Quality and safety always come first.

Can I request specific shots or camera angles?

Absolutely. Tell us your preferred angles, flight paths, or key areas of focus before flight day and we’ll plan accordingly to match your vision.

What should I do before you arrive?

Ensure site access, notify security or gate staff, and clear key areas if possible. We can send a quick checklist before arrival to make setup smooth.

What equipment do you use?

Our fleet includes the DJI Matrice 4E (RTK + mechanical shutterd) for mapping, the DJI Matrice 4T equipped with AL1 Spotlight for thermal inspections and low-light/night work, the DJI Mavic 3 Pro for photo/video, a DJI Power 1000 for field power, and an active RTK network subscription for real-time corrections. Reliable power, precision, and pro-grade data - every time.

What file formats do you deliver?

Photos: JPEG / DNG (RAW)
Video: MP4 / MOV up to 5.1K
Maps: GeoTIFF / TIFF
3D Models: OBJ / PLY / LAS
CAD Linework: DXF / DWG (polylines for roofs, boundaries, and site features, when requested)
Thermal: Radiometric thermal files (R-JPEG) and exported thermal imagery (JPEG/PNG), with optional annotated reports.
All files are delivered via secure download links.

Who owns the imagery and data?

You do. Once your project is complete and paid, you have full rights to use all imagery and data for internal, marketing, or client use. We reserve limited rights to use anonymized samples in our portfolio unless otherwise requested.

How can I get started?

Email Ryan@AeroDynamicDS.com or call/text (774) 507-0010
Tell us your project details and we’ll create a custom quote and flight plan.